Schedule a Meeting
Contact Us
Custom Designed Process Equipment
Custom Equipment
Heat Exchangers
Columns
Process Vessels
Lined Storage Tanks
Examples of customizations that deliver value to our customers include, but are not limited to:
Higher design temperature/pressure ratings
Specifically designed Impervite® Graphite block designs
Can meet numerous manufacturing marking and stamp requirements including ASME, KGS, CRN, and others.
Use of fluoropolymer-lined components
Specific thermal restrictions (heat flux, thermo-siphon operation, falling film, etc.)
Custom nozzle design and locations
CG Thermal can design columns with our mass transfer expertise and access to equilibrium databases.
Our in-house experience and worldwide partnerships allow us to offer columns for:
CG Thermal provides the best material and method of fluoropolymer lining based on:
CG Thermal has heat and mass transfer, equilibrium, and process simulation expertise to properly design and meet or exceed process requirements. We can also design to applicable codes and standards such as ASME and RTP.
Heat exchangers are customized to a wide range of designs and typically classified by flow configuration, heat transfer mechanisms, and material composition.
CG Thermal offers heat exchangers from the following materials:
Gas Absorption
Gas Scrubbing
Absorbing a gas with a liquid
Absorbing a gas with a liquid for environmental protection
Removing a dissolved gas from a liquid with a gas
Liquid Stripping
Separation by difference in volatility
Distillation
Trays, packed, or combination columns
Atmospheric, positive pressure, or vacuum
Internals
Hastelloy, FRP, PP, PTFE, or graphite (most common)
CG Thermal provides replacement graphite internals & liners
Materials of construction
Fluoropolymer-lined
Glass-lined
FRP
Rubber-lined steel
Stainless steels
• Lifetime warrantee against corrosion and erosion
• Field-repairable, resulting in very low maintenance costs
• Exceptional strength, durability, and service life
• Superior heat transfer efficiency
• Minimal fouling
SiC Umax® Advanced Ceramic
Impervite® Graphite
Impervite® PPS-GR (Graphite Compound)
Stainless Steel
Nickle-Alloy
SiC Umax® Advanced Ceramic
• Highest thermal conductivity
• Exceptional thermal shock resistance
• High toughness, lower brittleness
• Low thermal expansion rate
• Exceptional thermal stability
• Fully graphitized
Impervite® Graphite
• Superior corrosion resistance
• Low fouling
• Ease of maintenance, field-repairable
• Superior thermal and mechanical shock resistance
• High design pressure
Impervite® PPS-GR (Graphite Compound)
• Can operate with very high pressures and temperatures
• Good resistance to many corrosive streams
• High tensile strength
• Wide array of stainless steel grades to allow +1500°F gas streams
Stainless Steel
• Employed for harsher operating conditions
• Have an extremely wide temperature tolerance
• High strength and durability
• Corrosion rates make them a good solution for many reducing acids at moderate temperatures and chlorine concentrations
Nickle-Alloy
Impervite® PPS-GR (Graphite Compound)
Stainless Steel
Nickle-Alloy
SiC Umax® Advanced Ceramic
Impervite® Graphite
Stainless Steel
Nickle-Alloy
SiC Umax® Advanced Ceramic
Impervite® Graphite
Impervite® PPS-GR (Graphite Compound)
Nickle-Alloy
SiC Umax® Advanced Ceramic
Impervite® Graphite
Impervite® PPS-GR (Graphite Compound)
Stainless Steel
We offer process vessels such as:
Reactors
Level Drums
Contact Condensers
Knock-out Drums
Flash Drums
Manufacturing for atmospheric, positive, or vacuum pressure conditions
Custom dimensions, connections (size and location), and materials of construction
Geometry
Fluid composition
Temperature
Pressure
20-40 gallon lined tanks for pump priming, filtration, water treatment, and more.
Flexibility with quantity, size, and location of connections to best fit your system
CG Thermal's fluoropolymer materials include:
HDPE
XLPE
PP
PVDF
ECTFE
ETFE
FEP
MFA
PFA
PTFE-M
PTFE
Partial and completely packaged turnkey systems
• Excellent resistance to fatigue stress resulting in longer operational life
• Ideally suited for heat exchanger service
Learn More
Learn More
Learn More
Learn More
Learn More
Impervite® PPS-GR (Graphite Compound)
Stainless Steel
Nickle-Alloy
Stainless Steel
Nickle-Alloy
SiC Umax® Advanced Ceramic
Impervite® Graphite
SiC Umax® Advanced Ceramic
Impervite® Graphite
Impervite® PPS-GR (Graphite Compound)
Nickle-Alloy
SiC Umax® Advanced Ceramic
Impervite® Graphite
Impervite® PPS-GR (Graphite Compound)
Stainless Steel